Panasonic SMT NPM VF 8
Panasonic logo bl nega PNG

Panasonic – NPM-VF  Oddform Placement Machine

The NPM-VF is equipped with a double portal. The SMD and THT components are placed by one placement head per portal. The NPM-VF reaches a speed of up to 4,500cph and can process component sizes from 5x5mm up to 130x35mm and 60mm height. Active cutting and clinching tools are integrated which detach THT components from the radial and axial feeders. Clinching directions as well as pin lengths per THT component can be defined via the assembly program. Beside the radial and axial feeders, the NPM-VF can be equipped with all common standard feeder systems for SMD components. The flexible NPM-VF is an ideal machine for cycle-optimized production, especially for companies that must process both types of components due to the increased demand from power electronics for THT assemblies. This efficient pick and place machine contributes to reduce manpower requirements and to consistent production with high productivity, flexibility and high-quality pick and place results.

Request a Brochure
Make an Enquiry

Panasonic – NPM-VF  Oddform Placement Machine

The NPM-VF is equipped with a double portal. The SMD and THT components are placed by one placement head per portal. A wide variety of vacuum pipettes and grippers are available. The pick and place machine can be used in single or dual lane mode. The NPM-VF reaches a speed of up to 4,500cph and can process component sizes from 5x5mm up to 130x35mm and 60mm height. Active cutting and clinching tools are integrated which detach THT components from the radial and axial feeders. Clinching directions as well as pin lengths per THT component can be defined via the assembly program. Beside the radial and axial feeders, the NPM-VF can be equipped with all common standard feeder systems for SMD components. The flexible NPM-VF is an ideal machine for cycle-optimized production, especially for companies that must process both types of components due to the increased demand from power electronics for THT assemblies. This efficient pick and place machine contributes to reduce manpower requirements and to consistent production with high productivity, flexibility and high-quality pick and place results.

Panasonic SMT NPM VF 8
Panasonic logo bl nega PNG
Request a Brochure
Make an Enquiry

Panasonic – NPM-VF

Oddform Placement Machine

The NPM-VF is equipped with a double portal. The SMD and THT components are placed by one placement head per portal. A wide variety of vacuum pipettes and grippers are available. The pick and place machine can be used in single or dual lane mode. The NPM-VF reaches a speed of up to 4,500cph and can process component sizes from 5x5mm up to 130x35mm and 60mm height. Active cutting and clinching tools are integrated which detach THT components from the radial and axial feeders. Clinching directions as well as pin lengths per THT component can be defined via the assembly program. Beside the radial and axial feeders, the NPM-VF can be equipped with all common standard feeder systems for SMD components. The flexible NPM-VF is an ideal machine for cycle-optimized production, especially for companies that must process both types of components due to the increased demand from power electronics for THT assemblies. This efficient pick and place machine contributes to reduce manpower requirements and to consistent production with high productivity, flexibility and high-quality pick and place results.

Panasonic SMT NPM VF 8
Panasonic logo bl nega PNG
Request a Brochure
Make an Enquiry

Machine Specifications


Model ID

NPM-VF
  Standard conveyor Anvil conveyor (Option)
PCB dimensions (mm) L 50 x W 50 ~ L 510 x W 460 L 50 x W 50 ~ L 460 x W 400
Max. PCB mass *1
Up to 3kg

PCB thickness

0.3 ~ 8 mm
PCB flow
Left ← Right / Left → Right (Flow direction is selectable)
Insertion direction
360º (± 180º )  *1 degree unit
Insertion push force
Up to 100 N
PCB Exchange time 4.5 s 5.5 s
Clinch specifications Clinch angle : 60 degrees outward clinch
Clinch pitch : 2.5 to 40 mm
Lead bend angle : 10 ~ 40º
Lead diameter :

φ 0.4 mm ~ φ 1.0 mm (soft copper)
φ 0.4 mm ~ φ 0.8 mm (hard copper / CP wire)

Applicable components
Max. dimensions : L 130 mm × W 35 mm × H 60 mm • L 150 mm × W 38 mm × H
29 mm
Max. component mass : 200g
Electric source
3-phase AC 200, 220, 380, 400, 420, 480 V  2.7 kVA
Pneumatic source
0.5 ~ 0.8 MPa, 200 L /min (A.N.R.)
Dimensions (mm)
W 1 866 x D 2 332 x H 1 554 (Main body only)
W 2 166 x D 2 332 x H 1 554 (When downstream extension conveyor is
connected)
Note: Excluding the monitor, signal tower and ceiling fan
cover.
Mass
2 590 kg (Only for main body : This differs depending on the option
configuration)

Head Configurations

3-station head
Body chuck + Nozzle + Nozzle Tact : Max. 0.65 s / component *2, 3, 6
Body chuck + Nozzle + Swing nozzle
Body chuck + Nozzle + Lead chuck
Body chuck + Swing nozzle + Lead chuck
2-station head Body chuck + Body chuck Tact : Max. 0.9 s / component *2, 3

Component Supply

Stick
S Max. component dimension : W 20 x L 80 x H 20 mm
Max. stick width : 24 mm
Max. component mass : 2 kg in total (including stick mass)
L Max. component dimension : W 60 x L 80 x H 45 mm
Max. stick width : 64 mm
Max. component mass : 2 kg in total (including stick mass)

Radial tape
Max. body dimension : Max. φ 20 x H 30 mm
Lead pitch : 2.5 / 5.0 / 7.5 / 10.0 mm

Tray
Max. tray dimension : L 230 x W 335 x D 69 mm
Max. pallets per feeder : 20
Max. mass : 20 kg (magazine + pallet + tray + components)

Bulk *4
Customized spec

Machine
Configuration
  Max. number of products to be loaded Stick S Stick L Radial Tray
Front 30-slot fixed supply unit *5 15 7 10

Rear
30-slot fixed supply unit 15 7 10
13-slot fixed supply unit + single tray feeder 6 3 4 20
Twin tray feeder 40
Single tray feeder + Bowl feeder x 2 *4 20
Bowl feeder x 4 *4

SMT components *7
Applicable components Min. dimensions: L 5 mm × W 5 mm or larger (For tape, embossed tape of
12 mm or larger)
Placement specs Head: Nozzle only
Placement accuracy: QFP ±0.05 mm (Cpk ≧ 1)
Max. tact time: 3000 cph (per head)

Supply unit (embossed tape)
Tape feeder width 12/16 mm 24/32 mm 44/56 mm 72 mm 88 mm 104 mm
30-slot supply unit 30 15 10 7 6 5
13-slot supply unit 13 6 4 3 2 2
Panasonic SMT NPM VF 6

*1: PCB mass after insertion (including carrier mass)

*2: Except when anvil is attached

*3: During 2-head operation (configured similar to 2-beam specs) under optimum conditions

*4: Custom specs…Connection via the host feeder

*5: For front side configuration, select between 30 stations fixed supply unit (Std.) or feeder cart (Option)

*6: For Body chuck + Nozzle + Nozzle

*7: Standard conveyor specs

*Placement tact time may differ slightly depending on conditions.

*Please refer to the specification booklet for details.

Request a Brochure
Make an Enquiry

Machine Specifications


Model ID

NPM-VF
  Standard conveyor Anvil conveyor (Option)
PCB dimensions (mm) L 50 x W 50 ~ L 510 x W 460 L 50 x W 50 ~ L 460 x W 400
Max. PCB mass *1
Up to 3kg

PCB thickness

0.3 ~ 8 mm
PCB flow
Left ← Right / Left → Right (Flow direction is selectable)
Insertion direction
360º (± 180º )  *1 degree unit
Insertion push force
Up to 100 N
PCB Exchange time 4.5 s 5.5 s
Clinch specifications Clinch angle : 60 degrees outward clinch
Clinch pitch : 2.5 to 40 mm
Lead bend angle : 10 ~ 40º
Lead diameter :

φ 0.4 mm ~ φ 1.0 mm (soft copper)
φ 0.4 mm ~ φ 0.8 mm (hard copper / CP wire)

Applicable components
Max. dimensions : L 130 mm × W 35 mm × H 60 mm • L 150 mm × W 38 mm × H
29 mm
Max. component mass : 200g
Electric source
3-phase AC 200, 220, 380, 400, 420, 480 V  2.7 kVA
Pneumatic source
0.5 ~ 0.8 MPa, 200 L /min (A.N.R.)
Dimensions (mm)
W 1 866 x D 2 332 x H 1 554 (Main body only)
W 2 166 x D 2 332 x H 1 554 (When downstream extension conveyor is
connected)
Note: Excluding the monitor, signal tower and ceiling fan
cover.
Mass
2 590 kg (Only for main body : This differs depending on the option
configuration)

Head Configurations

3-station head
Body chuck + Nozzle + Nozzle Tact : Max. 0.65 s / component *2, 3, 6
Body chuck + Nozzle + Swing nozzle
Body chuck + Nozzle + Lead chuck
Body chuck + Swing nozzle + Lead chuck
2-station head Body chuck + Body chuck Tact : Max. 0.9 s / component *2, 3

Component Supply

Stick
S Max. component dimension : W 20 x L 80 x H 20 mm
Max. stick width : 24 mm
Max. component mass : 2 kg in total (including stick mass)
L Max. component dimension : W 60 x L 80 x H 45 mm
Max. stick width : 64 mm
Max. component mass : 2 kg in total (including stick mass)

Radial tape
Max. body dimension : Max. φ 20 x H 30 mm
Lead pitch : 2.5 / 5.0 / 7.5 / 10.0 mm

Tray
Max. tray dimension : L 230 x W 335 x D 69 mm
Max. pallets per feeder : 20
Max. mass : 20 kg (magazine + pallet + tray + components)

Bulk *4
Customized spec

Machine
Configuration
  Max. number of products to be loaded Stick S Stick L Radial Tray
Front 30-slot fixed supply unit *5 15 7 10

Rear
30-slot fixed supply unit 15 7 10
13-slot fixed supply unit + single tray feeder 6 3 4 20
Twin tray feeder 40
Single tray feeder + Bowl feeder x 2 *4 20
Bowl feeder x 4 *4

SMT components *7
Applicable components Min. dimensions: L 5 mm × W 5 mm or larger (For tape, embossed tape of
12 mm or larger)
Placement specs Head: Nozzle only
Placement accuracy: QFP ±0.05 mm (Cpk ≧ 1)
Max. tact time: 3000 cph (per head)

Supply unit (embossed tape)
Tape feeder width 12/16 mm 24/32 mm 44/56 mm 72 mm 88 mm 104 mm
30-slot supply unit 30 15 10 7 6 5
13-slot supply unit 13 6 4 3 2 2
Panasonic SMT NPM VF 6

*1: PCB mass after insertion (including carrier mass)

*2: Except when anvil is attached

*3: During 2-head operation (configured similar to 2-beam specs) under optimum conditions

*4: Custom specs…Connection via the host feeder

*5: For front side configuration, select between 30 stations fixed supply unit (Std.) or feeder cart (Option)

*6: For Body chuck + Nozzle + Nozzle

*7: Standard conveyor specs

*Placement tact time may differ slightly depending on conditions.

*Please refer to the specification booklet for details.

Request a Brochure
Make an Enquiry

Machine Specifications


Model ID

NPM-VF
  Standard conveyor Anvil conveyor (Option)
PCB dimensions (mm) L 50 x W 50 ~ L 510 x W 460 L 50 x W 50 ~ L 460 x W 400
Max. PCB mass *1
Up to 3kg

PCB thickness

0.3 ~ 8 mm
PCB flow
Left ← Right / Left → Right (Flow direction is selectable)
Insertion direction
360º (± 180º )  *1 degree unit
Insertion push force
Up to 100 N
PCB Exchange time 4.5 s 5.5 s
Clinch specifications Clinch angle : 60 degrees outward clinch
Clinch pitch : 2.5 to 40 mm
Lead bend angle : 10 ~ 40º
Lead diameter :

φ 0.4 mm ~ φ 1.0 mm (soft copper)
φ 0.4 mm ~ φ 0.8 mm (hard copper / CP wire)

Applicable components
Max. dimensions : L 130 mm × W 35 mm × H 60 mm • L 150 mm × W 38 mm × H
29 mm
Max. component mass : 200g
Electric source
3-phase AC 200, 220, 380, 400, 420, 480 V  2.7 kVA
Pneumatic source
0.5 ~ 0.8 MPa, 200 L /min (A.N.R.)
Dimensions (mm)
W 1 866 x D 2 332 x H 1 554 (Main body only)
W 2 166 x D 2 332 x H 1 554 (When downstream extension conveyor is
connected)
Note: Excluding the monitor, signal tower and ceiling fan
cover.
Mass
2 590 kg (Only for main body : This differs depending on the option
configuration)

Head Configurations

3-station head
Body chuck + Nozzle + Nozzle Tact : Max. 0.65 s / component *2, 3, 6
Body chuck + Nozzle + Swing nozzle
Body chuck + Nozzle + Lead chuck
Body chuck + Swing nozzle + Lead chuck
2-station head Body chuck + Body chuck Tact : Max. 0.9 s / component *2, 3

Component Supply

Stick
S Max. component dimension : W 20 x L 80 x H 20 mm
Max. stick width : 24 mm
Max. component mass : 2 kg in total (including stick mass)
L Max. component dimension : W 60 x L 80 x H 45 mm
Max. stick width : 64 mm
Max. component mass : 2 kg in total (including stick mass)

Radial tape
Max. body dimension : Max. φ 20 x H 30 mm
Lead pitch : 2.5 / 5.0 / 7.5 / 10.0 mm

Tray
Max. tray dimension : L 230 x W 335 x D 69 mm
Max. pallets per feeder : 20
Max. mass : 20 kg (magazine + pallet + tray + components)

Bulk *4
Customized spec

Machine
Configuration
  Max. number of products to be loaded Stick S Stick L Radial Tray
Front 30-slot fixed supply unit *5 15 7 10

Rear
30-slot fixed supply unit 15 7 10
13-slot fixed supply unit + single tray feeder 6 3 4 20
Twin tray feeder 40
Single tray feeder + Bowl feeder x 2 *4 20
Bowl feeder x 4 *4

SMT components *7
Applicable components Min. dimensions: L 5 mm × W 5 mm or larger (For tape, embossed tape of
12 mm or larger)
Placement specs Head: Nozzle only
Placement accuracy: QFP ±0.05 mm (Cpk ≧ 1)
Max. tact time: 3000 cph (per head)

Supply unit (embossed tape)
Tape feeder width 12/16 mm 24/32 mm 44/56 mm 72 mm 88 mm 104 mm
30-slot supply unit 30 15 10 7 6 5
13-slot supply unit 13 6 4 3 2 2
Panasonic SMT NPM VF 6

*1: PCB mass after insertion (including carrier mass)

*2: Except when anvil is attached

*3: During 2-head operation (configured similar to 2-beam specs) under optimum conditions

*4: Custom specs…Connection via the host feeder

*5: For front side configuration, select between 30 stations fixed supply unit (Std.) or feeder cart (Option)

*6: For Body chuck + Nozzle + Nozzle

*7: Standard conveyor specs

*Placement tact time may differ slightly depending on conditions.

*Please refer to the specification booklet for details.

Request a Brochure
Make an Enquiry

Contact Us

Detech Europe Limited

The Farm Office, Model Farm,

Atwick Road, Bewholme,

East Riding of Yorkshire,

YO25 8DT, United Kingdom

Phone: +44 (0)1262 409944

Email: [email protected]

Contact Us

Detech Europe Limited

The Farm Office, Model Farm,

Atwick Road, Bewholme,

East Riding of Yorkshire,

YO25 8DT, United Kingdom

Phone: +44 (0)1262 409944

Email: [email protected]

Contact Us

Detech Europe Limited

The Farm Office, Model Farm,

Atwick Road, Bewholme,

East Riding of Yorkshire,

YO25 8DT, United Kingdom

Phone: +44 (0)1262 409944

Email: [email protected]