Panasonic SMT NPM DX 8
Panasonic logo bl nega PNG

Panasonic – NPM-DX Modular Placement Machine

The NPM-DX provides a greater line throughput, better quality and lower production cost featuring an autonomous line control, which guaranties a stable operation based on automatic functionality. This functionality in combination with the machine set up offers a labour-saving production with improved utilization. In combination with the Panasonic software environment and embedded into an Industry 4.0 philosophy, the user can expect a modern shop floor management system including various remote operation options, feeder setup navigation, component supply navigation etc. In total, the NPM-DX reduces downtimes and increase the line throughput. With 92 400 cph and a feeder capacity for up to 136 reels, the NPM-DX is the ideal solution to meet the expectation of an evolving electronics assembly industry. The NPM-DX can process PCB sizes of up to 510 x 590 mm and place large connectors (up to 150 x 25mm) and other components (up to 120 x 90mm). This and other features make the NPM-DX the best solution for high volume-mix manufacturing.

Machine Specifications

Model ID
NPM-DX

PCB dimensions (mm)

*When the long spec. conveyor is selected

Single-lane mode L 50 × W 50 ~ L 510 × W 590
Dual-lane mode L 50 × W 50 ~ L 510 × W 300

PCB exchange time

*When the short spec. conveyor is selected

2.1 s ( L 275 mm or less)
4.8 s ( L 275 mm or over to L 460 mm or less) *May differ depending on PCB specifications.
Electric source 3-phase AC 200, 220, 380, 400, 420, 480 V 5.0 kVA
Pneumatic source *1 Min.0.5 MPa、200 L /min (A.N.R.)
Dimensions (mm) W 1 665 *2 × D 2 570 *3 × H 1 444 *4
Mass 3 600 kg (Only for main body:This differs depending on the option configuration.)
Placement head Lightweight
16-nozzle head V2
(Per head) 		Lightweight
8-nozzle head
(Per head) 		4-nozzle head
(Per head)
Max. speed 46 200 cph
(0.078 s/ chip) 		24 000 cph
(0.150 s/ chip) 		8 500 cph (0.424 s/ chip)
8 000 cph (0.450 s/ QFP)
Placement accuracy (Cpk≧1) ±25 μm/Square chip ±25 μm/ Square chip
±40 μm/QFP □12 mm Under
±25 μm/QFP □12 mm to □32 mm 		±20 μm/ QFP
Component dimensions (mm) 0201 component *5*6 / 03015 component *5
0402 component *5 to L 6 x W 6 x T 3 		0402 component *5 ~L 45 x W 45 or L 100 x W 40 x T 12 0603 chip ~ L 120 x W 90 or L 150 x W 25 x T 30
Component
supply 		Taping Tape:4 / 8 / 12 / 16 / 24 / 32 / 44 / 56 mm Tape:4 ~56 /72 / 88 / 104 mm
4, 8 mm tape:Max. 136
Stick Max. 32 (Single stick feeder)

*1 : Only for main body

*2: 2 265 mm in width if extension conveyors (300 mm) are placed on both sides.

*3: Dimension D including feeder cart

*4: Excluding the monitor, signal tower and ceiling fan cover.

*5: 0201/03015/0402 component requires a specific nozzle/tape feeder.

*6: 0201 component placement is optional. (Under conditions specified by Panasonic)

* Placement tact time and accuracy values may differ slightly depending on conditions.

* Please refer to the specification booklet for details.

Panasonic – NPM-DX Modular Placement Machine

The NPM-DX provides a greater line throughput, better quality and lower production cost featuring an autonomous line control, which guaranties a stable operation based on automatic functionality. This functionality in combination with the machine set up offers a labour-saving production with improved utilization. In combination with the Panasonic software environment and embedded into an Industry 4.0 philosophy, the user can expect a modern shop floor management system including various remote operation options, feeder setup navigation, component supply navigation etc. In total, the NPM-DX reduces downtimes and increase the line throughput. With 92 400 cph and a feeder capacity for up to 136 reels, the NPM-DX is the ideal solution to meet the expectation of an evolving electronics assembly industry. The NPM-DX can process PCB sizes of up to 510 x 590 mm and place large connectors (up to 150 x 25mm) and other components (up to 120 x 90mm). This and other features make the NPM-DX the best solution for high volume-mix manufacturing.

Panasonic logo bl nega PNG
Panasonic SMT NPM DX 8

Panasonic – NPM-DX

Modular Placement Machine

The NPM-DX provides a greater line throughput, better quality and lower production cost featuring an autonomous line control, which guaranties a stable operation based on automatic functionality. This functionality in combination with the machine set up offers a labour-saving production with improved utilization. In combination with the Panasonic software environment and embedded into an Industry 4.0 philosophy, the user can expect a modern shop floor management system including various remote operation options, feeder setup navigation, component supply navigation etc. In total, the NPM-DX reduces downtimes and increase the line throughput. With 92 400 cph and a feeder capacity for up to 136 reels, the NPM-DX is the ideal solution to meet the expectation of an evolving electronics assembly industry. The NPM-DX can process PCB sizes of up to 510 x 590 mm and place large connectors (up to 150 x 25mm) and other components (up to 120 x 90mm). This and other features make the NPM-DX the best solution for high volume-mix manufacturing.

Panasonic SMT NPM DX 8
Panasonic logo bl nega PNG

Machine Specifications

Model ID
NPM-DX

PCB dimensions (mm)

*When the long spec. conveyor is selected

Single-lane mode L 50 × W 50 ~ L 510 × W 590
Dual-lane mode L 50 × W 50 ~ L 510 × W 300

PCB exchange time

*When the short spec. conveyor is selected

2.1 s ( L 275 mm or less)
4.8 s ( L 275 mm or over to L 460 mm or less) *May differ depending on PCB specifications.
Electric source 3-phase AC 200, 220, 380, 400, 420, 480 V 5.0 kVA
Pneumatic source *1 Min.0.5 MPa、200 L /min (A.N.R.)
Dimensions (mm) W 1 665 *2 × D 2 570 *3 × H 1 444 *4
Mass 3 600 kg (Only for main body:This differs depending on the option configuration.)
Placement head Lightweight
16-nozzle head V2
(Per head) 		Lightweight
8-nozzle head
(Per head) 		4-nozzle head
(Per head)
Max. speed 46 200 cph
(0.078 s/ chip) 		24 000 cph
(0.150 s/ chip) 		8 500 cph (0.424 s/ chip)
8 000 cph (0.450 s/ QFP)
Placement accuracy (Cpk≧1) ±25 μm/Square chip ±25 μm/ Square chip
±40 μm/QFP □12 mm Under
±25 μm/QFP □12 mm to □32 mm 		±20 μm/ QFP
Component dimensions (mm) 0201 component *5*6 / 03015 component *5
0402 component *5 to L 6 x W 6 x T 3 		0402 component *5 ~L 45 x W 45 or L 100 x W 40 x T 12 0603 chip ~ L 120 x W 90 or L 150 x W 25 x T 30
Component
supply 		Taping Tape:4 / 8 / 12 / 16 / 24 / 32 / 44 / 56 mm Tape:4 ~56 /72 / 88 / 104 mm
4, 8 mm tape:Max. 136
Stick Max. 32 (Single stick feeder)

*1 : Only for main body

*2: 2 265 mm in width if extension conveyors (300 mm) are placed on both sides.

*3: Dimension D including feeder cart

*4: Excluding the monitor, signal tower and ceiling fan cover.

*5: 0201/03015/0402 component requires a specific nozzle/tape feeder.

*6: 0201 component placement is optional. (Under conditions specified by Panasonic)

* Placement tact time and accuracy values may differ slightly depending on conditions.

* Please refer to the specification booklet for details.

Machine Specifications

Model ID
NPM-DX

PCB dimensions (mm)

*When the long spec. conveyor is selected

Single-lane mode L 50 × W 50 ~ L 510 × W 590
Dual-lane mode L 50 × W 50 ~ L 510 × W 300

PCB exchange time

*When the short spec. conveyor is selected

2.1 s ( L 275 mm or less)
4.8 s ( L 275 mm or over to L 460 mm or less) *May differ depending on PCB specifications.
Electric source 3-phase AC 200, 220, 380, 400, 420, 480 V 5.0 kVA
Pneumatic source *1 Min.0.5 MPa、200 L /min (A.N.R.)
Dimensions (mm) W 1 665 *2 × D 2 570 *3 × H 1 444 *4
Mass 3 600 kg (Only for main body:This differs depending on the option configuration.)
Placement head Lightweight
16-nozzle head V2
(Per head) 		Lightweight
8-nozzle head
(Per head) 		4-nozzle head
(Per head)
Max. speed 46 200 cph
(0.078 s/ chip) 		24 000 cph
(0.150 s/ chip) 		8 500 cph (0.424 s/ chip)
8 000 cph (0.450 s/ QFP)
Placement accuracy (Cpk≧1) ±25 μm/Square chip ±25 μm/ Square chip
±40 μm/QFP □12 mm Under
±25 μm/QFP □12 mm to □32 mm 		±20 μm/ QFP
Component dimensions (mm) 0201 component *5*6 / 03015 component *5
0402 component *5 to L 6 x W 6 x T 3 		0402 component *5 ~L 45 x W 45 or L 100 x W 40 x T 12 0603 chip ~ L 120 x W 90 or L 150 x W 25 x T 30
Component
supply 		Taping Tape:4 / 8 / 12 / 16 / 24 / 32 / 44 / 56 mm Tape:4 ~56 /72 / 88 / 104 mm
4, 8 mm tape:Max. 136
Stick Max. 32 (Single stick feeder)

*1 : Only for main body

*2: 2 265 mm in width if extension conveyors (300 mm) are placed on both sides.

*3: Dimension D including feeder cart

*4: Excluding the monitor, signal tower and ceiling fan cover.

*5: 0201/03015/0402 component requires a specific nozzle/tape feeder.

*6: 0201 component placement is optional. (Under conditions specified by Panasonic)

* Placement tact time and accuracy values may differ slightly depending on conditions.

* Please refer to the specification booklet for details.

Contact Us

Detech Europe Limited

The Farm Office, Model Farm,

Atwick Road, Bewholme,

East Riding of Yorkshire,

YO25 8DT, United Kingdom

Phone: +44 (0)1262 409944

Email: sales@project1-4ibbmrsfgr.live-website.com

Contact Us

Detech Europe Limited

The Farm Office, Model Farm,

Atwick Road, Bewholme,

East Riding of Yorkshire,

YO25 8DT, United Kingdom

Phone: +44 (0)1262 409944

Email: sales@project1-4ibbmrsfgr.live-website.com

Contact Us

Detech Europe Limited

The Farm Office, Model Farm,

Atwick Road, Bewholme,

East Riding of Yorkshire,

YO25 8DT, United Kingdom

Phone: +44 (0)1262 409944

Email: sales@project1-4ibbmrsfgr.live-website.com